How To Program A Ford Transponder Key Without Original. Leave it on for about 15 minutes until you notice that the security light is gone. Put the key inside the ignition, and turn on the car.
Steps to program a transponder key (without the original) step number 1: In this guide, we look closer at what the transponder key is and how it works. Firstly, insert the new (unprogrammed) cut transponder key in the ignition.
Programming A Transponder Key Without Having The Original May Seem Quite An Intimidating Task, And Believe Us, It Doesn’t Have To Be That Hard.
Turn the key to the “on” position. In a similar way as step 2, rerun the procedure and put the transponder key in the “off” position again in 45 seconds. Step 2 is to put this ford key in the ignition switch of your ford vehicle and turn it on.
Leave It On For About 15 Minutes Until You Notice That The Security Light Is Gone.
Put the key inside the ignition, and turn on the car. Again, get to the “off” spot and put it back to the “on.” spot as well. Kit for bypassing the transponder key insert the ignition key into the ignition switch and turn it to the “on” position.
Once You Get The Security Alert, You Need To Wait 15 Minutes Before Proceeding.
Without the chip in the key, the car will not start. Without these signals, the ignition will not turn on, leaving you in trouble if you lose the key or need to order a new one. Get inside your car and enter the transponder key inside the ignition of your car.
How To Program A Transponder Key Without Original:
If you need to start your vehicle engine system, you have to get the right transponder key programming, to perform this transponder key bypass process. Make sure your original transponder key is not around you or the car so false signals won’t be sent to your car. Put the key inside the ignition, and turn on the car.
You Can Begin The Process By, Having A New Master Ford Key Cut Out That Exactly Matches The Original.
Things you need to know before process the transponder key if you don’t have original. As this is done, get back to the “on” position. Enter your vehicle with two of your programmed keys and the new key you are yet to program.