How To Light Pilot On Gas Fireplace With Remote. Always remove your fireplace glass prior to lighting your pilot. Has the pilot light on your fireplace gone out?
Has the pilot light on your fireplace gone out? If there’s a battery backup, the pilot light could be on without any gas going to the fireplace. Mendota gas fireplace won’t stay lit.
Has The Pilot Light On Your Fireplace Gone Out?
Use the temperature and timer modes to maximize your. And when you slide the switch at the off position, the device will remain off. Before turning it, you should look for an ignition button and check to see if a spark is present when you press it.
Reset The Knob To The Pilot Position:
Push in knob (this releases the gas to the pilot area only). This will ensure that the pilot light stays burning indefinitely, allowing you to use the device’s wall switch or remote control to turn on the fireplace whenever you like. Always remove your fireplace glass prior to lighting your pilot.
How To Light Pilot Light On Kozy Heat Fireplace.
Here’s how to light a gas fireplace with a control panel. Continue to hold in the knob with the pilot lit for 30 to 90 seconds, or until such time as when you release the knob, the pilot remains lit. Make sure your main gas supply is on.
If You Do This Correctly, The Pilot Light Should Start As Soon As The Flame Is Close Enough.
It shows that there is the slightest amount of gas running to the unit at all times. Turn the knob from the “off” to the “pilot” position. Continue pressing to turn the dial for thirty minutes.
If You Keep The Fireplace Switch In The On Position, The Receiver Will Stay On Until You Slide It To The Remote Or Off Position.
“on”, “off”, and “remote”, in front of the receiver. Install the battery into the transmitter. Turn the control knob on your fireplace from the “pilot” position to the “on” position once you’ve lit the pilot light.